If you are suspecting or know for sure that there’s mold in your house, then you should figure out what is the best way to deal with the problem. Well, the first thing you should do is to find out where the source is. This is the only way that you can stop it from coming back or spreading. If you will ask the pros, they will all say that what has to be done is to fix the moisture problem in your house. The only time when you can start dealing with your mold issues is when you are done with the moisture problems.
If you wish to finally end this problem, then here are few points to be mindful about.
Number 1. Get a home inspection – mold often grows in areas that doesn’t get enough light and has high humidity, which is the reason why it is hard to spot. It does not take much for such to live in these areas and it can have spread far and wide in your house once you see it. So to attain the best possible results, it is best that you work with the pros to do mold inspection.
The experts will then inspect different areas of your property that is vulnerable to mold such as the attic, ceilings, basement, behind drywall, crawlspaces and under sinks. Numerous homeowners don’t have any idea of how severe the problem is until the inspection is done.
Number 2. Remove the mold – you can clean the mold on your own if you are dealing with small surfaces. However, it is vital to ensure that you’re wearing protective gears such as respirator and gloves and make use of the appropriate cleaning products. For hard surfaces, you may want to use a multipurpose cleaner or perhaps, a regular detergent. It is not recommended however to make use of bleach and you must make sure that you’ve completely dried the surface after it is cleaned. Porous materials should be disposed and removed if it is affected by mold.
Number 3. Professional removal – you probably have to call an expert and trained professional to handle the problem if the mold has damaged a big part of the house. Look for companies that are capable of providing mold testing as well as removal. Experienced companies will not hesitate to give clients options on what is the best move to take in getting rid of the problem.
Contain the mold issue, remove and dispose them and restore the surface back to original condition is what they will do. Meaning to say, you can get everything done from making use of inhibitor to seal the area or replace the damaged structures.